Safer floors in minutes. No renovation.
Long lasting
Repels water & oil
Great around pools too!
WHAT IT IS
What is MoodSafe Anti-Slip Gel?
A surface treatment that works at a microscopic level to increase grip in wet areas, without changing how you clean. Tested to AS 4586:2013 to achieve a P4 (Low Risk of slippage).
Tested to AS 4586:2013
Achieves a P4 rating — Low Risk of slippage.
Easy to apply
Roll the gel evenly over where it's needed. No tradesman, no mess.
Works in minutes
Wait 15 minutes, rinse with water, and use the area normally.
Indoor and outdoor
Suitable for indoor and outdoor tiles. Covers up to 5m².
Slips don't give you warning.
The risk lives in the most ordinary places in your home.
Bathroom, shower, kitchen, stairs and outdoor areas are where a wet floor becomes a silent threat — especially for expecting mothers, older adults and children. You don't need to replace your floor to make it safer.
WHO IT'S FOR
-
Expecting mothers
-
Older adults & families
-
Strata & body corporate
-
Aged care & childcare
-
Small business
WHERE TO USE
Which surfaces?
Suitable
Glazed ceramic and porcelain tiles, indoor and outdoor.
Not suitable
Wooden floors, plastic surfaces, painted surfaces, fibreglass.
Pre-test first
High-gloss, polished, natural stone (marble, granite, travertine) and decorative tiles — the gel can permanently reduce gloss.
-
Bathroom & shower
-
Pool & pool surrounds
-
Outdoor areas
-
Stairs & entryways
-
Kitchen
HOW TO APPLY
HOW TO USE
-
PREPARE THE SURFACE
Make sure the area is clean & dry
-
APPLY THE GEL
Roll the gel evenly over where it's needed
-
RINSE OFF (15 min)
Wait 15 minutes, then rinse with water make sure to remove all excess gel.
*Applying the gel evenly prevents color differences, covers more area, ensures full slip resistance, and avoids slippery untreated spots.
It doesn't coat your tiles. It works on the surface at a microscopic level.
Designed for wet floors
Built to hold its grip in exactly the conditions that make tiles dangerous.
Nothing left on the surface
No coating, no film — once rinsed, you're walking on the tile itself.
Built-in roller head
Open the bottle and roll it on. No brushes, no trays, no mixing.
Fifteen minutes, one person
Clean, roll, rinse. Walk on it straight away.
SEE IT WORK
Watch it work on a wet ramp.
Same tile, same water. One side treated, one side not.
More safety
More peace of mind
Pick the size for your space.
Measure length × width to work out how many bottles you need.
WHO IT'S FOR
Designed for families, children, and the elderly. Strong grip and lasting confidence in every shower.
WHO IT'S FOR
Designed for families, children, and the elderly. Strong grip and lasting confidence in every shower.
Made for the people who need a sure step most — young children, older parents, anyone who moves a little slower on a wet floor. Apply it once, rinse, and walk on the tile itself. No coating, no film.
Questions we get most often
Not recommended for high-gloss or polished tiles where appearance and sheen are priorities — application may permanently reduce gloss or cause a matte/dulled finish. Before treating glossy, polished, or specialty tiles, perform a pre-test on a small, inconspicuous area or a sample tile; compare results before proceeding with full application.
Glazed ceramic and porcelain tiles, indoor and outdoor. Not suitable for wooden floors, plastic surfaces, painted surfaces, or fibreglass.
Long lasting. Wear depends on traffic and cleaning. Re-apply when you notice grip reducing.
Any questions? We got you.
Thanks for stopping by. weather you have a question, comment or just want to say hi. We’re here to help